Eurocode 1, Actions on structures, contains within its 10 parts (see table below) all the information required by the designer to assess the individual actions on a structure. It is generally self-explanatory and the actions to be used in the UK (as advised in the UK NAs) are typically the same as those in the old British Standards (BS 6399: Loading for buildings and BS 648: Schedule of weights of building materials). The most notable exception is the bulk density of reinforced concrete, which was increased to 25 kN/m3.
|BS EN 1991-1-1
||Densities, self-weight and imposed loads
|BS EN 1991-1-2
||Actions on structures exposed to fire
|BS EN 1991-1-3
|BS EN 1991-1-4
|BS EN 1991-1-5
|BS EN 1991-1-6
||Actions during execution
|BS EN 1991-1-7
||Accidental actions due to impact and explosions
|BS EN 1991-2
||Traffic loads on bridges
|BS EN 1-3
||Actions induced by cranes and machinery
|BS EN 1-4
||Actions in silos and tanks
Extract from How to Design Structures using Eurocode 2 (page 5, table 8)
This ninth annual report report presents the concrete industry’s sustainability performance in 2015.
This guide focuses on the use of concrete at Coin Street Neighbourhood Centre and its part in creating a low energy building.
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
£30.00 + VAT
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.
This guide focuses on concrete and masonry housing, and presents requirements for Part L1A of the Building Regulations.
Guidance on how concrete can be used to achieve credits under the latest version of BREEAM NC:2014.