Hollowcore slabs derive their name from the voids or cores which run through the units. The cores can function as service ducts and significantly reduce the self-weight of the slabs, maximising structural efficiency. The cores also have a benefit in sustainability terms in reducing the volume of material used. Units are generally available in standard 1200mm widths and in depths from 110mm to 400mm. There is total freedom in length of units, and splays and notches can readily be accommodated.
Hollowcore slabs have excellent span capabilities, achieving a capacity of 2.5 kN/m2 over a 16m span. The long-span capability is ideal for offices, retail or car park developments. Units are installed with or without a structural screed, depending on requirements. Slabs arrive on-site with a smooth pre-finished soffit. In car parks and other open structures, pre-finished soffits offer a maintenance free solution.
Prestressed units will have an upward camber dependent upon the span, level of prestress, etc. This will be reduced when screeds/toppings or other dead loads are applied.
£30.00 + VAT
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
This document provides information on the material and resource efficiency of concrete and masonry.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
This guide focuses on the use of concrete at Coin Street Neighbourhood Centre and its part in creating a low energy building.
Guidance on how concrete can be used to achieve credits under the latest version of BREEAM NC:2014.
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
An all-you-need-to-know guide on the specification of sustainable concrete.
A magazine to commemorate 70 years of Concrete Quarterly.